BH100 series: replace a failed driveline shear bolt
Restore the designed overload protection after checking why the bolt failed.
Manual-linked job
Bush Hog · Manual
50082978 2120 12120 OP MANUAL pub 07 22
Manual / technical document. Open the original manufacturer document. Confirm publication and serial range in PDF
- Resource type
- Manual
- Equipment
- Mowers & implements
- Language
- English; confirm in document
- Source checked
- 2026-09-18
- Access
- Original document link
Confirm model, serial/PIN range, region and installed components. External documents and media are provided by their publishers; Knopp Management is independent of these manufacturers.
Related resources
HDTH5 / HDTH6: inspect and replace damaged blades
Identify rejected blades and preserve the correct washer stack and fastening method.
Manual-linked job
HDTH5 / HDTH6: replace and adjust the mower belt
Replace the belt with the correct routing and measured tension-spring setting.
Manual-linked job
HTX417 / HTX419: correct poor hay pickup
Separate tine height, worn parts and mechanical faults before changing the setup.
Manual-linked job
14215R-2 Rotary Mower — Operator’s Manual
Operator manual. Searchable document with page references. Part No. 50079930 · Published 12/21
Search inside192 pages
14215R-2 Rotary Mower — Parts Manual
Parts manual. Searchable document with page references. Section 125 · Revised 10/23
Search inside34 pages